|
You must pair the Headset with your Bluetooth phone or any Bluetooth
device before you use the Headset for the first time. |
| |
1. |
Ensure the Headset is off. |
| |
2. |
Press and hold the function button for 5 seconds until the blue indicator
light flashes with the red indicator light to enter the pairing mode. |
| |
3. |
Ensure your mobile phone has the Bluetooth function and start the Bluetooth
new device searching function. Please follow the instructions of your mobile phone
to proceed the operation. |
| |
4. |
When your mobile phone is in the stage of searching a new Bluetooth device,
it will find the bluetooth. |
| |
5. |
Please choose and confirm the bluetooth. |
| |
6. |
Key in the Headset Password and press YES. If the pairing is successful, the
indicator turns to flash the blue light only. For some mobile phones, after pairing
you may have to select and confirm the bluetooth again to start the connecting.(Please
read your mobile phone manual carefully to take the right steps.) |
| |
7. |
The Headset is in the standby mode, you can start to receive and give a call. |
| |
8. |
If the pairing is not successful, the Headset will return to the standby mode
after a while, please repeat the pairing process to try the pairing again. |
| |
9. |
While pairing, it had better to keep the distance between the mobile phone
and Headset around 10 cm to 1m and to make sure no metal objects block between.
|
| |
10. |
While pairing the Headset with other Bluetooth device, as the device asks
for the Password, please also key in Password. For the detail, please check the
manual of your Bluetooth device to proceed the operation. |
| |
11. |
Even though the following situations happen, the paired devices remain pairing.
(1) The power for one of the devices is off.
(2) The service for one of the devices is off.
(3) One of the devices is re-switched on. |
| |
12. |
Read the Headset manual carefully and use it correctly by following the instructions.
|
| |
13. |
Put the Headset away from children, avoiding children swallowing it accidentally. |
| |
14. |
Do not use the cleaning liquid or spray to clean the Headset. |
| |
15. |
Do not clean the Headset while charging it. |
| |
16. |
Do not disassemble the Headset. If getting the problem, contact the retailer
shop. |
| |
|
|
| |
Q |
Why does the fully-charged Headset under the “On” mode not work
with the Bluetooth mobile phone? |
| |
A |
You must activate the Bluetooth function of your mobile phone and finish the
pairing between your mobile phone and Headset. |
| |
|
|
| |
Q |
Can the Bluetooth work with any of the mobile phones? |
| |
A |
No, this Headset works only with the Bluetooth mobile phones. |
| |
|
|
| |
Q |
How far is the working distance between the Headset and the mobile phone?
|
| |
A |
Since the Bluetooth is certificated by BQB, compliable with Bluetooth V1.2,
Class II, the longest working distance is 10 meters. But, this working distance
may be shortened by the interference existed in the surroundings and due to the
insufficient Bluetooth function of the mobile phone. |
| |
|
|
| |
Q |
Why does my Bluetooth mobile phone find many Bluetooth devices while searching
for the new Bluetooth device? |
| |
A |
Most of the mobile phones are allowed to find more than one Bluetooth device
within the working range. When the searching is finished, your mobile phone LCD
will show the Bluetooth or certain Unknown Devices. Please select and confirm
the Bluetooth. |
| |
|
|
| |
Q |
Why did my mobile phone not find the Headset? |
| |
A |
Only while your Headset is under the pairing mode, your mobile phone can find
the Headset. Please follow the instructions of your Headset manual to proceed
the pairing process. |
| |
|
|
| |
Q |
Shall we pair the Headset every time while using it? |
| |
A |
No. The paired devices remain paired regardless of turning the power off,
reopening the devices or changing the battery. |
| |
|
|
| |
Q |
Why is the voice from the Headset not clear? |
| |
A |
It may be the following two reasons:
(1) The location you are has the bad signal receiving, please move to the place
with the better signal receiving.
(2) The working range between the Headset and the mobile phone has been excessed.
Please make sure the Headset and mobile phone are within the working range of
10 meters and there is no obvious interference between. |
| |
|
|
| |
Q |
What can do if the voice from the Headset is not clear? |
| |
A |
Make sure your mobile phone is put on the place with the better signal receiving
and increase the volume of the mobile phone or the Headset. |
| |
|
|
| |
Q |
Why is the Headset suddenly not working? |
| |
A |
(1) The Headset might be out of power. When the battery gets low, the Headset
flashes the red indicator light, please charge it soon.
(2) The Bluetooth function of your mobile phone gets crash. It happens occasionally,
please turn the Bluetooth function of the mobile phone off and renew it or turn
off your Bluetooth mobile phone and turn it on again. |
| |
|
|
| |
Q |
Why could the voice dialing function of the Headset not be switched on? |
| |
A |
(1) Please re-record the voice tag.
(2) Some mobile phones do not support the voice dialing function. Please refer
to the manual of your mobile phone. |
| |
|
|
English | Chinese Copyright © 1999-2007 All rights reserved,Designed by HueyChiao.
